Shanti Boilers&Pressure Vessels Pvt. Ltd.
Home | Contact Us
TUV NABCB
   

Non IBR Boiler

TECHNICAL SPECIFICATIONS:

Details UNIT SCT-01         SCT-02 SCT-03 SCT-04 SCT-05 SCT-06
OPERATING PARAMETERS
Steam output F&A 1 00 °C kg/hr 100               200 300 400 500 600
Steam pressure kg/cm2 g   15.0 «-      
Fuel Oil Consumption LDO
FO
kg/hr
kg/hr
6                   12
mm                                                          mm
18
19.1
24
25.4
30
31.8
38
38.1
Efficiency NCV %   88 ±2 «-      
Start up time Min   3-5 «-      
Burner control     ON/OFF «-      
Pressure parts OUTSIDE THE PURVIEW OF INDIAN BOILER REGULATIONS
Electric Supply AC 3 Phase : 415 V ± 6% ; 50 Hz ± 3% ; 4 wire  
Connected Electrial Load
Feed water pump motor HP 0.5                   0.5 1 1 1 1
Blower + Fuel pump motor HP 1.5+1.0          1.5+1.0 2+1.5 2+1.5 2+2 2+2
Fuel oil preheater
(For F O fired units only)
KW   3 3 3 3
Total electrial load for :-
LDO Fired Units
F O Fired Units
  --» 2HP «--
2HP
--» 3HP «--
--»
3HP+3KW «--


SALIENT FEATURES :
  1. Reversing of flame offers high residence time and turbulance of furnace gases, ensuring maximum heat transfer.
  2. The three pass design with an integral atmospheric economizer and heat optimiser gives high operating thermal efficiency 88% on NCV of oil.
  3. Vertical packaged design reduces on site erection time and site work.
  4. Large diameter tube, single coil configuration reduces chances of choking of tubes to a big extent, offering reduced down time.
  5. Easy conversion to different Fuel Oils.
  6. High heat release rates achieved, because of high radiant heat transfer-surface utility.
  7. Higher combustion efficiency because of Pressure-Jet burner offering quick and uniform atomisation.
The efficiency is guaranteed on the testbay with commercially clean internal and external heat transfer surfaces.


We Also Offer:

IBR Boilers (Coal/Oil/Gas/Agro-waste/Wood fired)
Non-IBR Boilers (Oil/Gas Fired)
Electrode Boilers
Thermic Fluid Heating Systems (Oil/Gas/Coal/Wood/Husk Fired)
Industrial Drying Ovens (Electricity/Steam/Thermic Fluid)
Tray Driers (Oil/Gas Fired For 200 To 1200 Trays.)
Hot Water Generators.


Fuel oil consumption is based on Nett Calorific Value (NCV of:
  • 9,650 kcal/kg for Furnace Oil and
  • 10,200 kcal/kg for Light Diesel Oil (LDO)




For Contact us Click Here